RAMPTECH Air Start Couplings and Hose
Air Start Hose & Scuff
HBD/THERMOID® AERODUCT® AIR STARTER HOSE AND SCUFF
- ALL TIME INDUSTRY LEADER FOR AIR START HOSE & SCUFF
- BUILT TO EXCEED THE DEMANDING NEEDS OF THE GLOBAL AVIATION INDUSTRY
HBD/Thermoid® Aeroduct® Air Start Hose is built with specialized materials to ensure reliability and safe use. The hose is constructed from specially compounded silicone rubber that will withstand temperatures up to 500°F (260°C) and as low as ‑80°F (-62°C).
To enhance dimensional stability and flexibility, the hose is wrapped in cross-weave polyester cord. The cross-weave construction is integrally lock-bonded to the silicone hose to assure a burst strength greater than 450 psi (3.100 kPa). The hose is mold, mildew, and UV resistant and withstands exposure to common ramp chemicals including most solvents, oils, fuels, and Skydrol.
- WITHSTANDS TEMPERATURES UP TO 500°F (260°C) AND BELOW ‑80°F (-62°C)
- BURST STRENGTH OVER 450 PSI (3,100 KPA)
- RESISTANT TO MOST SOLVENTS SKYDROOL, FUELS, AND UV
- RESISTS MOLD AND MILDEW EXTEND HOSE SERVICE LIFE WITH FOUR DIFFERENT SCUFF JACKET DESIGNS
- CROSS WEAVE CORD FOR ENHANCED STABILITY AND FLEXIBILITY
- HOSE YARN LOCK-BONDED TO THE SILICONE TUBE
THERE IS NOT A BETTER AIR START HOSE IN THE WORLD TODAY!
10H09 AERODUCT® AIR START HOSE
INSIDE DIAMETER 3.5 in. (89 mm)
WALL THICKNESS 3/16 in. +/- 1/32 in. ( 4.76 mm +/- 0.8 mm)
WEIGHT PER FT. (M) 1.1 lbs. (0.5 kg)
HIGH TEMPERATURE 500°F (260°C)
LOW TEMPERATURE -80°F (-62°C)
BURST STRENGTH 450 psig (3,100 kPa)
MAXIMUM STATIC LOAD 2,000 lbs. (907 kg)
PROOF PRESSURE TESTED 200 psig (1,379 kPa)
STANDARD LENGTHS 20–60 ft. (6–16.75 m)
AVAILABLE IN FOUR DESIGNS TO PROTECT YOUR INVESTMENT
Replaceable leno weave or open-braided scuffer jackets are used to protect the hose and extend the hose service life. Scuff Jackets provide a layer of protection to the hose as it is dragged across the tarmac between storage and the point of use. Without a Scuff Jacket, the hose cannot endure wear from constant usage.
50859 Lightweight Scuff Jacket
50859LW series is a leno weave scuff jacket with a light weight wearstrip. This product features a closely woven treated fabric cover and an abrasive resistant rubber wearstrip.
50859LWHV Lightweight HiVis Heavy Duty Scuff Jacket
50859LWHV series is the same leno weave scuff jacket as above with an added high visibility coating spiraled around the outer cover that provides easy visibility. This is designed to help deter trip hazards and equipment run-overs that could potentially destroy the hose.
50859HD Standard Heavy Duty Scuff Jacket
50859HD series is the long time industry standard scuff cover. It has the same basic construction as the rest of the 50859 line, but with a heavy duty extruded wearstrip.
1106BR Military Scuff Jacket
1106BR series features an open weaved synthetic yarn with extruded abrasion-resistant rubber vulcanized wearstrip. This product is predominate in military applications
HOSE AND SCUFF ASSEMBLIES
The same 10H09 High End Airstart Hose is available as an assembly with any of the four different scuff jacket offerings.
All are top of the line products with each offering its own particular set of features:
- 51180LW series — light weight wearstrip
- 51180LWHV series — light weight wearstrip and high visibility coating
- 51180HD series — with a heavy duty extruded wearstrip
- 1170 series — open weave scuff cover
For part number reference use the above series call outs followed by the length you require.
All four hose and scuff assembly offerings are available in lengths from 20–60 feet in five foot increments.
Custom lengths are available.
AIR START HOSE, SCUFF COVERS, AND ASSEMBLIES
PART NUMBER GUIDE